Keep the first observation, repair and follow-up check separate so a supervisor can see the evidence and next action.
HVAC Leak Check editorial team · References checked
A job sheet can distinguish the checked location from what remains inaccessible.Photo: TSgt Joselito Aribuabo · Public domain
Give the original check, the repair and the follow-up check separate dates and results. The record should distinguish the repaired location from any part of the system that could not be checked. Do not overwrite the initial observation with a later value.
Keep three events on the job sheet
Original check. Record asset, circuit, location, method, observation, conditions and limits. Say whether a leak was confirmed or only suspected.
Repair. Record the date and the work or component identified by the responsible engineer. Keep gas quantity, recovery and contractor details where required.
Follow-up check. Record when and where the work was checked, the result, and any difference in access or operating state. Give the next action an owner when evidence is outstanding.
A photograph can show the work area; the record still needs the actual observation.Photo: Sgt. Samuel R. Beyers · Public domain
Schedule the follow-up separately
GOV.UK says that if a leak is found during a check it must be repaired as soon as possible and the test repeated within a month to verify the repair worked. The next routine check is a separate event. Use the rules for the equipment location; consult DAERA for Northern Ireland. For covered GB equipment, the official guidance lists records to keep for five years, including gas information and the dates and results of mandatory checks.
The field measurement tool keeps an observation and retest together. Add the job sheet reference to the asset’s records. The measurement tool is not itself a statutory log or evidence that a repair has been certified.
Common questions
Can the next regular visit serve as the repair follow-up?
When follow-up is required, record and schedule it separately. The GB guidance says to repeat the test within a month when a leak is found during a check.
What should the original check record if the location of the suspected leak was uncertain?
Write down the location, observations, method and areas that were not accessible. Label the location as suspected and preserve that first entry when further work confirms or rules it out.
What should I ask the engineer to record when they return to verify a leak repair?
Ask for the date, asset and area checked, who checked it, the method, findings and any remaining limitations. Link the entry to the original repair so another engineer can follow the sequence.
Can the next normal F-gas inspection count as the recheck if it is months away?
Schedule the repair check separately. GOV.UK says a leak found during a check must be repaired as soon as possible and checked within one month. A later routine visit cannot replace that deadline.